Terra Cenere
Grey cement without the maintenance schedule of actual cement.
What this finish is for
T02 is the floor finish we supply the most of. A mid grey with a very fine mineral speckle, completely matt, and specified almost entirely for large floor areas in workplaces, retail and circulation spaces.
The speckle is doing a job. A perfectly flat grey shows every scuff and every drag mark from a delivery trolley; a fine mineral break-up absorbs them. Eight years in, the difference between a floor that has been maintained and one that has been maintained badly is much smaller than it would be on a flat colour.
At 20 mm it is rated for external paving on pedestal systems. At 12 mm it is an internal floor. The two thicknesses are the same colour and the same batch recipe, so an internal floor can run out onto a terrace without a visible change.
Technical data
Typical values for the body. The two marked as sample references are supplied with this template and must be confirmed against your own project requirement before you rely on them.
A 3200 × 1600 slab is not a big tile
Two people and a frame move it; a suction rail does the rest. The reason the format matters is not the size of the slab, it is the number of joints that disappear from the drawing.
A three-metre island in 3200 comes out of one slab, with the waterfall ends book-matched from the same piece. In 1200 × 600 it is nine pieces and eight joints, and every one of those joints is a decision somebody has to make on site, at seven in the morning, with the client arriving at nine.
Others in this collection
Same body, same formats, same technical file structure — the difference is what the surface does in the room.
The technical file
Datasheet, CAD slab outlines and the care guide. No form, no email address required — the same files your fabricator will ask you for.
See it before you specify it.
A 200 × 200 mm sample tells you what a photograph cannot: how the surface behaves under the light in the actual room.
Sintered stone and engineered quartz surfaces, pressed and fired in Castellón for architects and fabricators in Europe and North America.
Camí Vell 118, 12540 Vila-real, Castellón, Spain
+34 964 000 000 · hello@ardesasurfaces.example
© 2026 Ardesa Surfaces S.L. · Established 2009 · CE marked — sample statement, verify before publishing