Linea Rovere
Oak grain pressed into stone, for walls that get wet.
What this finish is for
L03 carries a fine oak grain pressed into the surface. It is specified for wet rooms, spa walls and shower linings — places where timber is the intended look and timber is the wrong material.
The grain runs along the 2800 mm dimension. That is worth knowing at drawing stage, because a wall set out to run the grain vertically will use the slab across its short dimension and the number of joints roughly doubles.
It is a vertical finish. The relief that makes it look like timber also holds water and dirt when it is laid flat, and we do not recommend it as a floor at any thickness.
Technical data
Typical values for the body. The two marked as sample references are supplied with this template and must be confirmed against your own project requirement before you rely on them.
A 3200 × 1600 slab is not a big tile
Two people and a frame move it; a suction rail does the rest. The reason the format matters is not the size of the slab, it is the number of joints that disappear from the drawing.
A three-metre island in 3200 comes out of one slab, with the waterfall ends book-matched from the same piece. In 1200 × 600 it is nine pieces and eight joints, and every one of those joints is a decision somebody has to make on site, at seven in the morning, with the client arriving at nine.
Others in this collection
Same body, same formats, same technical file structure — the difference is what the surface does in the room.
The technical file
Datasheet, CAD slab outlines and the care guide. No form, no email address required — the same files your fabricator will ask you for.
See it before you specify it.
A 200 × 200 mm sample tells you what a photograph cannot: how the surface behaves under the light in the actual room.
Sintered stone and engineered quartz surfaces, pressed and fired in Castellón for architects and fabricators in Europe and North America.
Camí Vell 118, 12540 Vila-real, Castellón, Spain
+34 964 000 000 · hello@ardesasurfaces.example
© 2026 Ardesa Surfaces S.L. · Established 2009 · CE marked — sample statement, verify before publishing